Kodak announced the all new DSC Pro SLR/c, a Canon mount version of the SLR/n which utilizes a new body made by Sigma (this isn't stated but is obvious). This announcement now brings Kodak back full circle to the 'good old' Kodak DCS days when they would have both a Nikon and Canon mount of each camera. Other than the obvious differences between a Nikon and Canon body there are also a few other subtle differences, the SLR/c is slightly smaller, has a 1/180 sec flash sync speed, a new AF system and a smaller LCD monitor. The SLR/c becomes the highest resolution Canon mount digital SLR, and a full 35 mm sensor to boot.

KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera Features:

The DCS SLR/c camera's sensor incorporates an enhanced optical transmission system that further increases image quality - particularly with tungsten light sources

Full resolution 14MP, 6MP, and 3MP sizes are available for both RAW and JPEG files and thumbnail 0.8MP size for JPEG files only.

Fully calibrated ISO range of 6 to 800, while those that utilize DCS raw files can also access a non-calibrated ISO range that extends from 1000 to 1600

A full resolution raw image burst depth of ~19 frames from the cameras integrated 512 MB RAM buffer and a hardware "sleep mode" that conserves battery life when the camera is not in use

The camera captures images at about 1.7 frames per second

Images are stored via COMPACTFLASH and/or MMC/SD memory cards

KODAK PROFESSIONAL DCS Pro SLR/c Specifications:

Image Sensor Type	CMOS
Resolution	13.89 Megapixel
Camera Type	SLR/Professional
Lens
Interchangeable Lens	With Interchangeable Lens
Digital Zoom	Without Digital Zoom
Focus Range	Varies With Lens
Image Quality
Resolution	13.89 Megapixel
Resolutions	4500 x 3000 • 2250 x 1500 • 1125 x 750
Exposure Control
ISO Speeds	50 • 160 • 800 • 1600
Shutter Speed	1/6000 sec
White Balance	Auto • Daylight / Sunny (Preset) • Fluorescent (Preset) • Tungsten (Preset) • Flash (Preset)
Frames Per Second	1.7 Frames
Storage
Memory Type	CompactFlash Card Type I • CompactFlash Card Type II • MMC Card
Compression Modes	Uncompressed
Compression Type	JPEG • TIFF • Raw Image
File Size (High Res.)	41 MB (3 images on 128MB card)
Flash
Flash Type	External
Viewfinder / Display
Viewfinder	Optical (Through-the-lens)
LCD Panel	With LCD Panel
LCD Panel Size	1.8 in.
LCD Screen Resolution	130,000 pixels
LCD Protected Position	Without LCD Protected Position
Interfaces
Interface	Firewire
Video Interface	Video Out
Power Supply
Battery Type	Proprietary Lithium
Battery Life	400 Images
Included Features
Self Timer	2 Sec. • 10 Sec.
Mp3 Built In	Without MP3
Built-in Microphone	With Built-in Microphone
Built-in Speaker	Without Built-in Speaker
Tripod Mount	With Tripod Mount
System Requirements
Operating System	Apple Mac OS X • Microsoft Windows 2000 • Microsoft Windows XP
Dimensions
Width	5.88 in.
Depth	3 in.
Height	5.38 in.
Weight	1.97 lb.
Warranty	1 Year

News:

Kodak Offers More Choices for Pro Photographers by Introducing New 14MP Digital SLR Camera with CANON EOS Mount Compatibility

Highest Resolution, Broadest ISO Performance in a Digital SLR

HANNOVER, Germany, March 18 -Providing professional photographers with a choice of lens mounts on its new digital SLR cameras, Eastman Kodak Company today introduced the KODAK PROFESSIONAL DCS Pro SLR/c - a digital camera compatible with the popular CANON EOS lens mount. It offers the same superior resolution, broad ISO performance and extended burst depth found in the acclaimed KODAK PROFESSIONAL DCS Pro SLR/n digital camera built on a NIKON F-mount and introduced in February, 2004.

"Once again, Kodak combines the best of medium-format image quality with the convenience and flexibility of 35mm photography in its digital SLR cameras. The introduction of our DCS Pro SLR/c further meets the needs of our customers by giving them a choice of lens mounts," said Jay Kelbley, Worldwide and US&C Product Manager, Professional Digital Capture. "By pairing a CANON EOS compatible lens mount with highest performance sensor available in a digital SLR today, we are now providing stunning image detail and broad ISO range to customers who use CANON lenses."

Image Quality and Key Features

As with the DCS Pro SLR/n, the DCS SLR/c camera leverages the same 4536 x 3024 pixel (effective), 12-bit CMOS imager that covers the full 24mm-by-36mm image area of 35mm film. With a full-size sensor, photographers regain the benefits of true wide-angle lenses and can use their CANON EF-lenses the same way they used them with 35mm film. This new sensor incorporates advanced High Performance-Low Noise (HPLN) technology, incorporating a unique pixel design and an optimized device manufacturing process that enables increased sensitivity and reduced noise levels that result in broader ISO performance.

The DCS SLR/c camera's sensor incorporates an enhanced optical transmission system that further increases image quality - particularly with tungsten light sources. Consistent with the recent generation of DCS Professional cameras from Kodak, photographers can select the appropriate image size that suits their particular shooting environment and workflow. Full resolution 14MP, 6MP, and 3MP sizes are available for both RAW and JPEG files and thumbnail 0.8MP size for JPEG files only.

As with the DCS Pro SLR/n, photographers using the SLR/c will have the benefit of a fully calibrated ISO range of 6 to 800, while those that utilize DCS raw files can also access a non-calibrated ISO range that extends from 1000 to 1600. In addition to this broad ISO range, the feature set for the SLR/c camera includes long-exposure capabilities, enabling exposures up to 30 seconds at settings down to 6 ISO, a full resolution raw image burst depth of ~19 frames from the cameras integrated 512 MB RAM buffer and a hardware "sleep mode" that conserves battery life when the camera is not in use.

The camera captures images at about 1.7 frames per second. Images can be saved as DCR raw files, normal JPEG files or ERI-JPEG files. The ERI-JPEG files serve as another form of picture protection for photographers, especially in situations where re-shooting is inconvenient. They provide two stops of exposure latitude and extended color space within a JPEG workflow - a benefit no competitor offers. Images are stored via COMPACTFLASH and/or MMC/SD memory cards. Images can be written to each card type simultaneously in any combination of the three available formats. In addition, FIREWIRE connectivity - at a transfer rate of up to 12 MB per second - adds speed to the photographers' workflow.

Designed with a new, custom magnesium body, the DCS Pro SLR/c camera includes a vertical trigger that works in conjunction with the camera's auto orientation sensor. The sensor detects the camera's orientation +/- 90 degrees from the horizontal position. This enables automatic rotation of the image as it moves to a computer for manipulation, saving photographers time and improving workflow - hallmarks of Kodak's efforts to make digital easier for customers.

Simplifying Digital, Free Firmware Upgrades

The DCS Pro SLR/c camera includes features for both new and more advanced digital shooters. The camera operates in two user modes: basic and advanced. It defaults to the basic setting and offers a very intuitive, simple interface. In the advanced mode, the user can access and adjust a host of capture, resolution, storage and other settings.

Many key features of the DCS Pro SLR/c camera are based on KODAK PROFESSIONAL firmware and are not hard-wired within the camera, so they can be enhanced and easily upgraded with free firmware downloads from Kodak. Free firmware upgrades essentially give photographers a "new" camera, whereas most other manufacturers require the purchase of an entirely new camera system to receive the latest enhancements.

Kodak leverages the CANON Evaluative - Through The Lens (E-TTL) flash metering system in the DCS Pro SLR/c digital camera. Photographers can expect near-perfect flash exposures with the camera, an improvement over many existing professional digital cameras.

The DCS Pro SLR/c has a camera interface localized in nine languages and comes complete with the latest versions of the following software:

KODAK PROFESSIONAL DCS Photo Desk - including Expert level noise processing tools

KODAK PROFESSIONAL DCS Camera Manager

KODAK PROFESSIONAL DCS File Format Module

KODAK PROFESSIONAL Extended Range Imaging Technology File Format Module

Availability of the KODAK PROFESSIONAL DCS Pro SLR/c digital camera begins in May, 2004 through authorized dealers of KODAK PROFESSIONAL digital imaging solutions.